Worry-Free Maintenance Plans

 

1 Precision Air Conditioning Tune-Up

The benefits include:

  • Lower utility bills by reducing energy consumption and waste
  • Extended equipment life
  • Peace of mind for you and your family
  • Fewer repairs, and improved system reliability
  • Increased cooling capacity and efficiency

The Air Conditioning Tune-Up include:

  • Clean and thoroughly wash condenser coil(s)
  • Wash and level condensing unit for proper motor and bearing wear
  • Lubricate motor and fan bearings as well as other moving parts as necessary
  • Clean and inspect evaporator coil and drain pan when readily accessible
  • Inspect condensate drain lines and fittings
  • Clean, level, and calibrate thermostat
  • Adjust and thoroughly clean blower motor and fan assembly as needed
  • Inspect, tighten and test all electrical connections. This includes disconnect switch
  • Inspect all cooling system electrical wires, connectors, and terminals
  • Test system starting and running capacitors
  • Test all controls, switches, relays, transformers, contactors, motors, and fans
  • Measure starting and running amperes, line voltage, and control voltage
  • Test system-starting capabilities
  • Test system for proper airflow and air delivery
  • Inspect and adjust all safety controls
  • Monitor refrigerant (Freon) pressures and temperatures
  • Test and record super-heat and sub-cooling
  • Compare with factory specifications
  • Adjust Freon metering control device per factory/manufactures recommendations
  • Test and measure air-conditioning system for proper production and capacity
  • Monitor fan motors and compressor operating temperatures
  • Complete and present full written report

1 Precision Furnace Tune-Up

The benefits include:

  • Lower utility bills
  • Extended equipment life
  • Fewer repairs, breakdowns, and improved system reliability
  • Peace of mind for you and your family
  • Increased heating capacity

The Furnace Tune-Up include:

  • Inspect and tighten all electrical connections and terminals
  • Clean, and adjust main gas burners
  • Clean, and adjust ignition / pilot assembly
  • Inspect heat-exchanger(s) & combustion chambers for cracks, rusting, or problem areas
  • Vacuum out blower compartment; return airdrop, and surrounding area – No duct cleaning
  • Inspect the flue assembly and test flue gas drafting mechanism
  • Test and inspect all furnace safety controls
  • Test, record, and adjust gas pressure
  • Replace or clean standard air filters
  • Lubricate all fan motors and all moving parts
  • Measure and adjust blower for correct airflow
  • Adjust all dampers and set proper blower speed(s) – No air balancing
  • Clean, level, test, and calibrate thermostat
  • Measure and record heating system output
  • Inspect and test thermocouple output as well as pilot safety switch
  • Measure and record electrical voltage, amperage, and component resistance
  • Inspect and test all system transformers, relays, contactors, and controls – Measure performance
  • Repair minor air leaks in plenum and return airdrop
  • Advise customer on other ways to reduce energy consumption, improve safety and enhance comfort

While enrolled in this Agreement; any time you need service you will get Priority Service Scheduling. Absolute Freedom from Diagnostic Charges, you will receive a 15% Discount on any part needed with a full 2 year warranty on parts.

Additional charge applies if we supply the filter

Take Advantage of This Amazing Offer for a Low Monthly Investment of Only $14.95

2 Systems – $14.95 for first, additional $9.99 for second

Your comfort and complete satisfaction is very important to us. Try this program for ninety days; if you’re not 100% Satisfied you may cancel at anytime.